only load certain processes at startup

[theworld]

Step 1. Open your taskbar > Run and type in "MSCONFIG" (whithout the "")

step 2. go to the start up tab

step 3. uncheck anything you don't want loaded

Do not uncheck ScanRegestry SysTray (systemTray) or LoadPowerProfile (there May be 2 of these, this is normal, do not uncheck either)

step 4. press Apply and reboot at the prompt

Disclaimer. I am not responsible if you skrue it up somehow, it is very commenly used and used by many ppl, but you need justy a bit of computer knowledge,.

[madboyv1]

it's also very importnat that you know what programing you are disabling it's autoloading feature. Infact, before you go into MSCONFIG disabling this and that, Go into the programs you want to stop and see if you can disable startup loading from withen the program.

[syhs89]

in advance,
you can also disable them in regedit
cause some of them you cannot find in msconfig!

[emptyspace]

I think this is for advance user only... if some noob do it... maybe somthing wrong will happen :lol:

[syhs89]

normally,
you can straight away disable all the start up in
msconfig
it will reload if it is very important!
you just cannot disable them!