Engineering Entrance Examinations AIEEE

[minisoji]

All India Engineering/ Architecture Entrance Examination (AIEEE) : Application Procedure

Application can either be made ‘Online’ or submitted on prescribed Application Form only.

Information Bulletin containing Application Form can be had by post from the Joint Secretary (AIEEE), Central Board of Secondary Education, 17, Rouse Avenue, Institutional Area, (Near Bal Bhawan), New Delhi - 110002 or personally from Regional Offices of CBSE and Designated Branches of Syndicate Bank/Other Banks/ Designated Institutions. The Syndicate Bank/other Banks, the designated institutions and Regional Offices of the CBSE will not send the Information Bulletin by Post. Hence, no request should be made to them for sending the Bulletin by Post. Candidate should not buy the Information Bulletin from any private publisher/vender as these may be fake Information Bulletins.

To obtain information Bulletin-cum-Application form by post candidates should send their request to the Joint Secretary (AIEEE), CBSE, Shiksha Sadan, 17-Rouse Avenue, Institutional Area, (Near Bal Bhawan), New Delhi-110 002 along with a bank draft of requisite amount payable in favour of The Secretary, CBSE at New Delhi and a self addressed envelope of 12" x 10".

Online submission of application with photograph and signature on Computer Printed Form generated and down loaded from the website and to be sent by Registered/Sped Post (not by courier) to CBSE and payment made (a) Bank Draft, or (b) Syndicate Bank AIEEE Challan Form, generated at the time of submission of particulars are down loaded from the website, in any branch across the country

Candidates are required to retain a print copy of application form, number, date, the mode of remittance of Examination fee and the copy of the Bank Draft/Syndicate Bank AIEEE Challan. In addition to Examination Fee, some Service/ Processing Charges will have to be paid by the candidates.

ONLINE SUBMISSION

Online submission of application may be made by accessing the AIEEE website www.aieee.nic.in.

The candidate should supply all details while filling up the Online Form. Candidates are required to take a print of the Online Application after successful submission of data. The print out of the computer generated Application Form/Confirmation Page complete in all respect as applicable for Offline submission should be sent to the Assistant Secretary(AIEEE), Central Board of Secondary Education, P.S.1-2, Institutional Area, Patparganj, I.P. Extn., Delhi-11 0092 by Speed Post/Registered Post only. Candidates should pay the fee as mentioned. The fee could be remitted in the fol lowing ways:

a) By credit card, or

b) Through Demand Draft which should be in favour of the Secretary, Central Board of Secondary Education, Delhi drawn in any Nationalized Bank payable at Delhi. Write your name, address, registration number/application number and paper opted on the back of the Demand Draft.

c) Candidates submitting Application Online are required:

- to retain a photocopy of computer generated confirmation page with registration/application number.

- The candidate can get his/her confirmation page after confirmation of fee by bank or CBSE for that the candidate can check the status of receipt of fee by entering Regn. No., Name & Date of Birth.

Even after the successful submission of Online Application within due date, if the Application Form does not reach the Board on or before the last date or without the requisite fee, the Application Form of the candidate will be treated as cancelled. The candidates should supply all the required details while filling up the Online Form. On submission of detail, a confirmation page with Registration Number shall be generated. Candidates are required to take print out of confirmation page and paste photograph, put left hand thumb impression and sign in the space earmarked for the purpose.

Submission of Application

The application form duly filled-in along with other documents, if any, should be sent by Registered/Speed Post to The Joint Secretary (AIEEE), Central Board of Secondary Education, 17, Rouse Avenue, Institutional Area, (Near Bal Bhawan), New Delhi - 110002

The last date for receipt of application form by Registered/Speed Post is tentatively First week of February. Thereafter 15 days grace time will be allowed to the candidates belonging to remote areas viz. Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland, Sikkim, Tripura, Lahaul and Spiti District and Pangi sub division of Chamba District of Himachal Pradesh, Andaman & Nicobar Islands and Lakshadweep.

[minisoji]

All India Engineering/ Architecture Entrance Examination (AIEEE) : Selection

All India Engineering/ Architecture Entrance Examination (AIEEE) : Selection
On the basis of performance in AIEEE, separate rank lists will be prepared for B.E./B.Tech., and B.Arch/B.Planning. Score Card indicating All India Rank with total marks and marks in each subject shall be sent to all candidates appearing in AIEEE. Candidates scoring above a certain cut off percentage of marks (being different for General and SC/ST/PH category candidates) to be called for counselling shall be determined at the time of declaration of AIEEE results.
Cut off percentage of marks for OBC shall be determined as and when govenment orders are issued for the same. All India Rank and marks shall also be released on AIEEE website.

B.E/B.Tech - By marks obtained in Mathematics and then in Physics in the AIEEE and then by age (preference to older candidates).

B.Arch/B.Planning - By marks obtained in Aptitude Test and then in Mathematics in the AIEEE and then by age (preference to older candidates).

Verification of documents would be done at the time of counselling/admission. The purpose would be to verify different records regarding identification, age, qualifying examination, state of eligibility and category of the candidate. On failing to establish of any of the documents, the candidates will not be considered for admission. SC, ST and PH candidates will be required to produce original certificate issued by the competent authority at the time of counselling, failing which they will not be considered for admission.

[minisoji]

All India Engineering/ Architecture Entrance Examination (AIEEE) : Syllabus- Mathematics

Sets, Relations and Functions :
Sets and their representation; Union, intersection and complement of sets and their algebraic properties; Power set; Relation, Types of relations, equivalence relations, functions;. one-one, into and onto functions, composition of functions.

Complex Numbers and Quadratic Equations :
Complex numbers as ordered pairs of reals, Representation of complex numbers in the form a+ib and their representation in a plane, Argand diagram, algebra of complex numbers, modulus and argument (or amplitude) of a complex number, square root of a complex number, triangle inequality, Quadratic equations in real and complex number system and their solutions. Relation between roots and co-efficients, nature of roots, formation of quadratic equations with given roots.

Matrices and Determinants :
Matrices, algebra of matrices, types of matrices, determinants and matrices of order two and three. Properties of determinants, evaluation of determinants, area of triangles using determinants. Adjoint and evaluation of inverse of a square matrix using determinants and elementary transformations, Test of consistency and solution of simultaneous linear equations in two or three variables using determinants and matrices.

Permutations and Combinations :
Fundamental principle of counting, permutation as an arrangement and combination as selection, Meaning of P (n,r) and C (n,r), simple applications.

Mathematical Induction :
Principle of Mathematical Induction and its simple applications.

Binomial Theorem and its Simple Applications :
Binomial theorem for a positive integral index, general term and middle term, properties of Binomial coefficients and simple applications.

Sequences and Series :
Arithmetic and Geometric progressions, insertion of arithmetic, geometric means between two given numbers. Relation between A.M. and G.M. Sum upto n terms of special series: Sn, Sn2, Sn3. Arithmetico - Geometric progression.

Limit, Continuity and Differentiability :
Real - valued functions, algebra of functions, polynomials, rational, trigonometric, logarithmic and exponential functions, inverse functions. Graphs of simple functions. Limits, continuity and differentiability. Differentiation of the sum, difference, product and quotient of two functions. Differentiation of trigonometric, inverse trigonometric, logarithmic, exponential, composite and implicit functions; derivatives of order upto two. Rolle’s and Lagrange’s Mean Value Theorems. Applications of derivatives: Rate of change of quantities, monotonic - increasing and decreasing functions, Maxima and minima of functions of one variable, tangents and normals.

Integral Calculus :
Integral as an anti - derivative. Fundamental integrals involving algebraic, trigonometric, exponential and logarithmic functions. Integration by substitution, by parts and by partial fractions. Integration using trigonometric identities.
Evaluation of simple integrals of the type
Integral as limit of a sum. Fundamental Theorem of Calculus. Properties of definite integrals. Evaluation of definite integrals, determining areas of the regions bounded by simple curves in standard form.

Differential Equations :
Ordinary differential equations, their order and degree. Formation of differential equations. Solution of differential equations by the method of separation of variables, solution of homogeneous and linear differential equations of the type:
dy/dx + p (x) y = q (x)

Co-Ordinate Geometry :
Cartesian system of rectangular co-ordinates in a plane, distance formula, section formula, locus and its equation, translation of axes, slope of a line, parallel and perpendicular lines, intercepts of a line on the coordinate axes.
Straight lines
Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, distance of a point from a line, equations of internal and external bisectors of angles between two lines, coordinates of centroid, orthocentre and circumcentre of a triangle, equation of family of lines passing through the point of intersection of two lines.

Circles, conic sections
Standard form of equation of a circle, general form of the equation of a circle, its radius and centre, equation of a circle when the end points of a diameter are given, points of intersection of a line and a circle with the centre at the origin and condition for a line to be tangent to a circle, equation of the tangent. Sections of cones, equations of conic sections (parabola, ellipse and hyperbola) in standard forms, condition for y = mx + c to be a tangent and point (s) of tangency.

Three dimensional Geometry :
Coordinates of a point in space, distance between two points, section formula, direction ratios and direction cosines, angle between two intersecting lines. Skew lines, the shortest distance between them and its equation. Equations of a line and a plane in different forms, intersection of a line and a plane, coplanar lines.

Vector Algebra :
Vectors and scalars, addition of vectors, components of a vector in two dimensions and three dimensional space, scalar and vector products, scalar and vector triple product.

Statistics and Probability :
Measures of Dispersion
Calculation of mean, median, mode of grouped and ungrouped data. Calculation of standard deviation, variance and mean deviation for grouped and ungrouped data.

Probability
Probability of an event, addition and multiplication theorems of probability, Baye’s theorem, probability distribution of a random variate, Bernoulli trials and Binomial distribution.

Trigonometry :
Trigonometrical identities and equations. Trigonometrical functions. Inverse trigonometrical functions and their properties. Heights and Distances.

Mathematical Reasoning :
Statements, logical operations and, or, implies, implied by, if and only if. Understanding of tautology, contradiction, converse and contrapositive.